Greetings Guest!  / Create an account
Guest Join UsHi Guest,
Welcome. Join our awesome Warwick Aero Modellers (WAM) community where you can discuss various topics :-
Flying (Radio Controlled Models)
Fellowship
Fun
Events
Competitions
Much More . . . or Create an Account


Thread Rating:
  • 2 Vote(s) - 2 Average
  • 1
  • 2
  • 3
  • 4
  • 5
"SPAD" Simple Plastic Aircraft Design
#61
Oh good. Well I will come down 2. Gas blow torch?? I want 2 make one, not melt it. Sounds good kennyglide, c u then.
Reply
#62
Seems at this point only 2 sheets of DEPRON will be required.as only 2 people have expressed an interest in the DELTA WING...... I will bring a couple of extras just in case other people get excited by the prospect of a simple ,fast ,easy to fly ,and most importantly CHEAP to build plane. Also to answer your question Jason I am not sure this coloured thin tape is available in Warwick but I reckon just wide packing tape would do the trick as it will be a very light craft anyway..... you can get clear and yukky brown colour at Bunnings .... who knows they may have some nicer colours by now ..... here is a LINK showing how to go about covering your DEPRON. https://www.youtube.com/watch?v=PbyVGfB1oCg Cheers Ken
MAKING MODELS IS MEDICINE FOR THE MIND  Smile
Reply
#63
Hi Ken, l think there might be more than 2 people there tomorrow, if it looks simple to build a few more will join in!!
Angel
Reply
#64
I'm keen. So long as I can fit a REAL ENGINE, not one of those fiddly non-noise and non-smoke making thingies.
 [Image: SaitoFS82b.jpg]Everyone knows that REAL ENGINES are used by REAL men. Eklectic motors are best left for use in toothbrushes and other unnecessary things.
Reply
#65
How did today go? Sorry I couldn't make it. Too much to do at home.
 [Image: SaitoFS82b.jpg]Everyone knows that REAL ENGINES are used by REAL men. Eklectic motors are best left for use in toothbrushes and other unnecessary things.
Reply
#66
Thanks for a good time Kennyglide. Am eagerly waiting 4 part 2 next week. Was well worth it and the hands on was great. Only suggestion 4 next week, is maybe do the build in the morning, while the sun is in our eyes. we can fly after?
Reply
#67
    R.T.F........not the most streamlined but should do the job .... I am not going to be available for the next 2 weekends due to family stuff ,but will leave the finished wing at the shed so anyone that is interested can copy it or at least get some ideas . I am going to maiden it so hopefully it is still in one piece . If requested I can I can leave any tools.ie: cutters, pva glue ,depron , ...I will glue a few sheets of the depron together with pva in preparation as it takes a day or two to dry, our test sheets stuck together really well. I will also bring some MDF to use as a cutting board..... Cheers Ken
MAKING MODELS IS MEDICINE FOR THE MIND  Smile
Reply
#68
Complete with battery ect:


Attached Files Image(s)
   
MAKING MODELS IS MEDICINE FOR THE MIND  Smile
Reply
#69
Ah ! Hi Kennyglide where are you?? 
SPAD is a stand still   Smile
Reply
#70
Hi , after our club SPAD update today ,I think the general consensus is that we move on to the next project... I have had no luck with my delta... but am willing help give some help to others who have already built their planes to get them flying .... after such success with my own delta i may not be in demand on that front (lol) ... any how moving right along I have shown a few people videos and pics of the MIG 7 Combat Plane and there does seem to be some interest. Made from Corflute ,they fly well ,and can be either Electric or Nitro. I intend to put some links up and also the link to the free plans when I can, as it has to be downloaded onto a ZIP file or something (HELP REQUIRED) .....here is the first Youtube link showing a mass build of these pretty little planes. https://www.youtube.com/watch?v=VhK7lhOPWD4 ...........SLOPE SOARING MIG7.... https://www.youtube.com/watch?v=B4Rif42bMGg ........PUTTING A MIG 7 THROUGH ITS PACES.. https://www.youtube.com/watch?v=UKPzXRecY-o ......MIG 7 MAIDEN . .. https://www.youtube.com/watch?v=2BDmuRQn8lk .... MIG7 ELECTRIC FLIGHT .. https://www.youtube.com/watch?v=YrufJ7A7YO0 .....MIG7 WITH OS 25 NITRO...QUICK https://www.youtube.com/watch?v=QC8nmiBJa8M ...... Will post the free plan site tomorrow.... I'm buzzing just watching these videos.,they look like a really adaptable great flying plane .
MAKING MODELS IS MEDICINE FOR THE MIND  Smile
Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)

About Warwick Aero Modellers

Warwick Aero Modellers Inc.
Morgan Park Sporting Complex
"BARCLAY AIRFIELD"
271 Old Stanthorpe Rd. Morgan Park,
WARWICK QLD 4370.

President:- Greg Barclay Mob: 0417 616 264
Secretary:- Chris Gordon-Smith Mob: 0403 216 426
Visitors are always welcome . . .

For any more information, please use our contact form.

              Quick Links

              User Links

              Notices