Greetings Guest!  / Create an account
Guest Join UsHi Guest,
Welcome. Join our awesome Warwick Aero Modellers (WAM) community where you can discuss various topics :-
Flying (Radio Controlled Models)
Fellowship
Fun
Events
Competitions
Much More . . . or Create an Account


Thread Rating:
  • 2 Vote(s) - 2 Average
  • 1
  • 2
  • 3
  • 4
  • 5
"SPAD" Simple Plastic Aircraft Design
Looks like it will do the job.....FPV eh.....be interesting to see how that goes ....I might venture into that one day....depends on the cost.....
MAKING MODELS IS MEDICINE FOR THE MIND  Smile
Reply
(25-01-2021, 01:06 PM)KENNYGLIDE Wrote: Looks like it will do the job.....FPV eh.....be interesting to see how that goes ....I might venture into that one day....depends on the cost.....

Goggles and camera cost me $70. Plus l can record what l see.
Reply
The DAGGER pitch problem appears 2 have been sorted. I have changed the wing shape from asymmetrical ....a very flat bottom...to roughly symetrical.... have only had one flight so far due to weather conditions ....fingers crossed..
MAKING MODELS IS MEDICINE FOR THE MIND  Smile
Reply
A new Skin on the cutting board..


Attached Files Image(s)
   
Reply
That's going to be a bit of an unorthodox design Chris.
 [Image: SaitoFS82b.jpg]Everyone knows that REAL ENGINES are used by REAL men. Eklectic motors are best left for use in toothbrushes and other unnecessary things.
Reply
(21-08-2020, 11:56 PM)KENNYGLIDE Wrote: Best corfute glue  i have found after numerous tests.....contact for the wings,very hot glue gun  for the rest....sand a bit with 120 grit non clog sandpaper....wipe down with acetone ,let it dry ,and it's ready to go...hot glue is not convenient on the wings because it sets too quickly....in my latest build (THE DAGGER) I used the wooden metre stick from Office Works....takes the place of the recommended  American yard stick...cost around $7.....seems to be very strong so finger crossed. The last Dagger clapped its hands ,i was using a very light aluminum spar,the good news was that  quite  a few of the corflute parts survived ,tail feathers,ailerons ect and all other accessories  survived a very hard nose in....made the rebuild fairly easy.

Hi Kennyglide, my boy is hassling me to help him glue his wing together. I remember asking you once about what you glue the spar (or is it spars with the latest wing?) in with, but I can't remember what you said. Was it epoxy or be really fast with the glue gun? 

Also, with your latest symmetrical wing, did you use the same plan measurements or tweak it to keep top and bottom measurements the same?
 [Image: SaitoFS82b.jpg]Everyone knows that REAL ENGINES are used by REAL men. Eklectic motors are best left for use in toothbrushes and other unnecessary things.
Reply


Forum Jump:


Users browsing this thread: 11 Guest(s)

About Warwick Aero Modellers

Warwick Aero Modellers Inc.
Morgan Park Sporting Complex
"BARCLAY AIRFIELD"
271 Old Stanthorpe Rd. Morgan Park,
WARWICK QLD 4370.

President:- Greg Barclay Mob: 0417 616 264
Secretary:- Chris Gordon-Smith Mob: 0403 216 426
Visitors are always welcome . . .

For any more information, please use our contact form.

              Quick Links

              User Links

              Notices