General Announcements

[KENNYGLIDE]

Have 6 or so people interested in making S.P.A.D.S.....   from Depron ,Coreflute ,.Foamboard, or whatever .....  as we know the jump from an "IDEA"  to actually getting a Project up and running requires some serious planning and i am hoping to do some brain-storming between now and the next meeting. I doubt  we will all want to build the same model  .... some may want to use Coreflute and others Depron ect: some may want to build a simple Delta Wing   look under Experimental Airlines on youtube for that one ... others may want to build more complicated planes as shown on "SPAD TO THE BONE " website and various other sites on the web.... i will post some links  soon in the S.P.A.D BUILD FORUM...... As i have already discussed with some other members our  great little shed should be ideal for for this project/s . We have tables ....  power for glue guns may be problematic but they are very low wattage so may be ok ...have to check on that.....Alternatively to start  we could concentrate on getting the plans downloaded and scaled to the correct size ..... cut them out and transfer to the build material and cut them out at home and then bring  back the pieces  for a session of folding and glueing..... So as i see it the first step for all builders will be to decide what plane they want to build and get the plans downloaded and cut out ready for transfer to the build material...this can be a bit tricky so a lesson or two on these basics may be a good starting point.......looking forward  to   GETTING SOME FEEDBACK  so as to be well prepared for the next meeting. PLEASE SEND all FEEDBACK to the S.P.A.D BUILD FORUM.